# How to see where you stood with the Court heatmap

> Read the Court heatmap on Match Breakdown: where you and your opponent stood at every shot, the points you won or lost, one rally at a time, court zones, jump smashes, and how to get a match read.

Source: https://www.getgoodatbadminton.com/docs/court-heatmap
Updated: 2026-11-16
Answers: Where is the Court heatmap? / How do I see where I stood on the points I lost? / What does Read this match do and how long does it take? / What do time on court and where the shots went mean? / Why does my match have no court positions? / How do I ask for a manual calibration?

The Court heatmap shows where you and your opponent stood at every shot of a match. Ground you kept coming back to fills in with your color, and ground you rarely used stays faint. We read the footage for where each player stood, so it works on your tracked matches that have video. This page shows how to read it and how to get a match read.

## Before you start

- The Court heatmap is on Match Breakdown for tracked matches, yours and ones shared with you, on the website and in the app. It doesn't show for pro matches, or in compare mode.
- The match has to be read for court positions first. Until it is, the card shows **Read this match** instead. See [Read this match](#read-this-match).

## Open the Court heatmap

**Web:**

### Step 1: Open Match Breakdown

In the sidebar, choose **Performance Insights**, then **Match Breakdown**.

### Step 2: Pick the match

Use the **Match** picker at the top of the page.

### Step 3: Scroll to Court heatmap

The card sits right under Match Replay.

**iPhone and Android:**

### Step 1: Open the match

Open the menu, tap **Performance Insights**, then **Match Breakdown**, and pick the match.

### Step 2: Scroll to Court heatmap

The card is under the charts.

## What the ovals show

Each shot puts an oval around each player's feet, where they stood when it was hit. The ovals stack, so the more often a player stood somewhere, the stronger their color gets there.

You're always drawn on the bottom half and your opponent on the top, even though you change ends between games. Each player has their own color: side A is red and orange, side B is blue and teal. The list beside the court names who is which.

What each part of the card does:

1. **All**, **Points won** and **Points lost** pick which rallies the court shows: every rally, only the points you won, or only the points you lost.
2. **All games**, **Game 1**, **Game 2** and so on narrow it to one game. These show when the match has more than one game.
3. The arrows step through the rallies one at a time. The label between them says which rally you're on, like "Rally 12 · 3 of 40". **All together** goes back to every rally.
4. **Players** lists who is on court and how many shots are in view. Each name says **bottom** or **top**. Click a name to hide that player's ovals, and click it again to bring them back.
5. **Jump smashes** shows how high each player's smashes left the floor. See [Jump smashes](#jump-smashes).
6. The two small courts under the heatmap are the court zones. The left one is time on court, and the right one is where the shots went. See [Court zones](#court-zones).

The filters work together. Pick **Points lost** and **Game 3**, then step through, and you see every point you lost in the third game, one at a time.

In the app the card has the same filters and arrows. The player list there names each player but can't hide one.

## Step through one rally

Press the right arrow to start at the first rally in view, or the left arrow to start at the last. With one rally on the court, a grey line shows how each player moved between shots.

The count in the middle only includes rallies we have positions for. A rally we couldn't see is left out, so the number can be lower than the rallies in the match.

## Court zones

Each half of the court is split into six zones: front, mid and back, then left and right as you look from your end. Front, mid and back are equal thirds of the half. Your half is at the bottom, your opponent's at the top. Each zone shows its share as a percentage, and the busiest zone is in bold. Hover a zone on the website to see the count behind it.

The zones follow the filters above them, so **Points lost** shows the zones of the points you lost.

### Time on court

The left court shows how long each player spent in each zone while rallies were being played, from where their body was. Under the player's name:

- **m a rally** is how far they moved in an average rally, in meters.
- **Most time** is the zone they spent the longest in, like "Most time 38% mid left".

### Where the shots went

The right court shows where each player had to hit from, which is where the other player's shots sent them. Your half shows where your opponent made you play, and their half shows where you made them play.

- **You sent** and your opponent's name gives the zone you sent them to most.
- Your opponent's name then **sent you** gives the zone they sent you to most.

Each one also says how many shots it counts.

A shot counts where it was played, which isn't always where the body stood. A net shot, lift, net kill or brush is taken with a lunge and the racket out in front, so it counts 1.2 meters nearer the net than your feet. Clears, drops, smashes, drives and blocks count where you stood. Serves are left out, and a winner nobody reached isn't counted.

In the app this court is labeled **Where shots went**.

## Jump smashes

**Jump smashes** has a line for each player who smashed in the rallies in view. It says how many of their smashes were hit in the air, like "9 of 14 in the air", then a typical and a highest height, like "32 cm typical · 41 cm highest".

Under 10 cm counts as on the floor. Only smashes where we could see the player's feet count.

Match Replay shows the same height on each smash as it's played. See [Read the shot labels](https://www.getgoodatbadminton.com/docs/match-replay#read-the-shot-labels).

## Read this match

A match that hasn't been read yet shows **Read this match** where the heatmap would be. Only the person who owns the match can press it. On a match a friend shared with you, the card says it hasn't been read for court positions yet.

### Step 1: Press Read this match

The card says about how long it takes before you press it.

### Step 2: Wait for Queued, then Reading

The card says **Queued to read**, then **Reading your match**, with about how long the read takes. You can leave the page. The card checks every 30 seconds while the read runs, and the heatmap appears by itself when it's done.

### Step 3: Watch the match with everything on

Once the match is read, the heatmap fills in, and Match Replay gets its court map, shot labels on the hitter's arm and jump heights.

A read takes about as long as your rallies add up to, plus about 4 minutes, and never less than 5 minutes. A match with 30 minutes of rallies says about 34 minutes.

The same button shows in Match Replay's **HUD** menu, and in the app. A read started in one place shows in the others.

If a read fails, the card says **The last read didn't finish.** Press **Try again**. If it fails twice, request a manual calibration and our staff will look at it.

A read needs the match's video and its shot tags, since we read each rally at the shots you tagged. Without them, pressing the button says so.

## Request a manual calibration

If the positions look wrong for your court, you can ask our staff to calibrate the match by hand. They mark the court lines and place the players' feet on a spread of shots, and then the whole match is read again with that court.

### Step 1: Press Request manual calibration

It's under the player list on the card, or under the message when a read finished without positions or failed. Only the person who owns the match sees it.

### Step 2: Wait for staff

The card says **Manual calibration requested** with the date. Once staff have calibrated it, it says **Calibrated by GGAB staff. Updating the map now.**

### Step 3: Check the new positions

When the match is read again, the card says **Calibrated by hand** with the date. If it still looks wrong, **Request again** asks for another look.

You can request a calibration in the app too, from the same card.

## Why a match has no court positions

- **It hasn't been read yet.** Press **Read this match**. If someone shared the match with you, only they can.
- **The read is still running.** The card says **Queued to read** or **Reading your match**.
- **The read failed.** Press **Try again**, and request a manual calibration if it fails again.
- **We read it but couldn't place the players.** The card says **We read this match but couldn't place the players on the court.** This happens when we can't find the court in the video, or can't find the players on it. Request a manual calibration.
- **The match has no video or no tagged shots.** A read needs both.
- **It's a pro match, or you're comparing two matches.** The card doesn't show there.

To film matches that read well, see [Recording your matches](https://www.getgoodatbadminton.com/docs/recording-matches).

## Related guides

- [Match Breakdown](https://www.getgoodatbadminton.com/docs/match-breakdown)
- [How to watch a match back in Match Replay](https://www.getgoodatbadminton.com/docs/match-replay)
- [Recording your matches](https://www.getgoodatbadminton.com/docs/recording-matches)
