Insights & analysis
How to watch a match back in Match Replay
Play your match with a scorebug, a label on every shot and a court map, pick what shows in the HUD menu, go full screen, and cut any set of rallies into a clip to save or share.
Updated
Match Replay plays your match the way a broadcast would. The score sits over the footage, every shot gets a label as it's played, and a small court map shows where both of you stood. This page shows how to drive it and how to cut rallies into a clip.
Before you startLink to this section
- Match Replay plays a match that has its video. Pro matches don't play here, and the player says Pro videos unavailable for replay.
- The Clip button only shows on your own matches. It's hidden on a match a friend shared with you, on pro matches and in compare mode.
- Shot labels on the hitter's arm, jump heights and the court map need the match to be read for court positions. See Read this match.
Open Match ReplayLink to this section
Open Match BreakdownLink to this section
In the sidebar, choose Performance Insights, then Match Breakdown.
Pick the matchLink to this section
Use the Match picker at the top of the page.
Scroll to Match ReplayLink to this section
It sits under the verdict. The footage is on the left and the current rally's shots are on the right.
Pressing a point under What happened, or Watch it on your best run, also plays that rally here.
Open the matchLink to this section
Open the menu, tap Performance Insights, then Match Breakdown, and pick the match.
Tap Watch the matchLink to this section
The match opens full screen, turned sideways.
In the app, the rally number, the game and the score show as the video runs, and each shot is captioned as it's played. A smash hit in the air adds its height, like "Forehand Smash Straight · 32 cm jump". The HUD menu and clips are on the website.
The rest of this page covers the website.
Move around the matchLink to this section
Under the video, from left to right:
- Step back, Play and Step forward move one frame at a time or play the match. The speaker mutes it, and the speed buttons run it from 0.25× to 2×.
- Prev rally and Next rally skip between rallies. A couple of seconds into a rally, Prev rally restarts that rally instead.
- Rally 12 / 113 says which rally you're in.
- The line under the buttons is the whole match. Each block is a rally, and the one you're in is red. Click a block to jump to that rally, or click between blocks to go to that moment.
The list on the right shows the shots of the rally on screen, with the time, the shot, You or Opp, and how it ended. It lights up each shot as it's hit. Click a shot to jump to just before it.
What the scorebug showsLink to this section
The scorebug is the broadcast graphic over the footage. It has three parts:
- Top left: the game number, both names, the games each of you has won, and the points. A red dot marks who is serving. When a rally ends, the winner's point turns red for a few seconds.
- Top right: the rally number, the shot count and the rally clock, like "Rally 12 · Shot 7 · 0:09".
- Bottom left: the shot being played and who played it. When the rally ends, it says how for 4 seconds: Winner with the shot, or the kind of error with the shot and where it went, like Into the net. The player's name sits beside it, and a winner shows on red.
Read the shot labelsLink to this section
Each shot gets a label that comes off the hitter's wrist. The label appears 0.3 seconds before contact, so it's already there as the swing builds, and it holds for 1.3 seconds after. It sits up and to the right of the wrist and follows the arm at a steady pace, with a line back to the wrist and the forearm traced.
- The top line names the shot.
- The line under it says the striking side, the direction and how the shot ended, like "Forehand · Straight · Winner".
- Your labels are red. Your opponent's are dark.
On a smash hit in the air, the label also says how high the hitter jumped, like "32 cm jump". Under 10 cm counts as on the floor and shows nothing. The Court heatmap adds these up for the whole match.
If the match hasn't been read for court positions, the labels sit low on the frame instead, yours on the left and your opponent's on the right.
Read the court mapLink to this section
The court map sits in the bottom right corner. It covers the rally on screen:
- An oval where each of you stood at every shot so far, in your player color. Ovals stack, so ground you keep coming back to fills in.
- A faint grey line for how each of you moved in between.
- A dot on each foot for where each of you is right now.
The map is drawn the way the camera sees the court, with the camera's end at the bottom. The names under it say who is which color.
Choose what shows with the HUD menuLink to this section
Press HUD under the video. Each switch applies right away, and your browser remembers it for next time. On a match that hasn't been read yet, the menu also has Read this match at the top.

Shot labels follow the hitter's arm. Clips record what's on here.
What each switch does:
- All turns everything on or off at once.
- Scorebug shows or hides the score, the rally clock and the line along the bottom.
- Your shots shows or hides the labels on your shots. With it off, the bottom line stops naming your shots too.
- Opponent's shots does the same for your opponent.
- Court map shows or hides the map in the corner.
- Striking side adds forehand, backhand or around the head to each label.
- Direction adds straight, cross or middle.
- Jump height adds the height to a smash hit in the air. The smash in this sample was hit from the floor, so it has no height to add.
- Outcome adds how the shot ended, like Winner or Unforced error.
The four switches under Shot labels say dim when both Your shots and Opponent's shots are off, because there's no label left to change. The end of rally graphic always shows for both players while Scorebug is on.
Go full screenLink to this section
Press Full screen under the video. The footage, the scorebug and the controls fill the screen. HUD and Clip then open as panels floating over the top right of the footage, so the video never gets pushed out of view. Press Exit full screen, or Esc, to come back.
Some browsers can't put part of a page in full screen, Safari on iPhone for one. The button doesn't show there.
Make a clipLink to this section
A clip is a video of the rallies you pick, with whatever the HUD is showing recorded into it.
Set the HUD firstLink to this section
A clip records what's on screen. Turn off anything you don't want in it with the HUD menu before you record.
Press ClipLink to this section
The panel opens with the rally on screen already picked.
Pick the ralliesLink to this section
Click a rally's number to add it or take it out. Hold Shift and click to pick the whole run from the last rally you clicked. Rallies are grouped by game. Or use the shortcuts:
- All picks every rally.
- Won picks the points you won.
- Lost picks the points you lost.
- Clear empties the selection.
Hover a number to see whether you won or lost that point.
Choose one video or a clip per rallyLink to this section
With more than one rally picked, choose One video to cut them together with the dead time between rallies dropped, or A clip per rally to get a separate video for each.
Press Record clipLink to this section
With a clip per rally, the button counts them, like Record 5 clips. The length shows next to the button. Recording runs at normal speed, so a 20 second clip takes 20 seconds. Keep the tab open until it's done. Stop ends it early.
Save itLink to this section
For one video, press Save video. For a clip per rally, press Save next to a rally, or Save all to download them together in one .zip file. New clip starts over.
Each rally in a clip starts half a second before the serve and runs a second and a half past the end of the rally, so the point lands on screen.
Clip limitsLink to this section
- One video can be up to 20 minutes long. If your rallies add up to more, the first 20 minutes are kept, and the panel says so before you record.
- A clip per rally keeps up to 60 seconds of each rally.
- Clips are saved as MP4 where your browser can record it, and WebM otherwise.
- Clips record in Chrome, Edge and Safari. In a browser that can't record, the panel tells you.
- Every clip carries a small getgoodatbadminton.com mark in the bottom right. With Scorebug off, the mark stays and the scorebug is left out.
Share a clipLink to this section
When a recording of one video finishes, Share clip shows next to Save video if the clip is one rally, or a run of rallies with none skipped, and is no longer than 60 seconds.
Press Share clipLink to this section
We upload the clip and make a link to it. The button says Uploading clip… while it goes.
Send itLink to this section
If your browser has a share sheet, it opens with the link in the message, and with the video attached where your device can share files. If it doesn't, the link is copied for you to paste. If the upload took a while, the button says Share now. Press it once more.
Turn it off when you wantLink to this section
The link shows under the button with Copy and Stop sharing. Stop sharing turns the link off and deletes the uploaded clip.
Stop sharing stays under the button until you close the Clip panel, start a new clip or leave the page. After that, the link stays on.
Anyone with the link can watch the clip without signing in. The page shows the clip you recorded and the score sheet for those rallies, with both players' names. It never plays the rest of your match video, and search engines are told not to list it. See Share a link anyone can open for more.
A longer cut, or one that skips rallies, can't be shared as a link. Save it and send the file yourself.
Related guidesLink to this section
This page answers
- How do I watch my match with the score on screen?
- How do I turn off the shot labels in Match Replay?
- How do I make a clip of a rally?
- How do I get a video of all the points I won?
- What does 32 cm jump mean on a smash?
- Why are the shot labels at the bottom of the video and not on the player?
Was this page helpful?